Filter
Top Products
77
Settings
Note
Before disabling the PIN code request feature, you must
enter your PIN
The following options are available:
]Enable: You must enter the PIN each time the phone
is switched on.
]Disable: The phone connects directly to the network
when you switch it on.
Fixed Dial Number (FDN) (Menu 9.5.2)
Allows you to restrict your outgoing calls to selected
phone numbers, if this function is supported by your
SmartChip. The PIN2 code is required.
The following options are available:
]Disable: You can call any number.
]Enable: You can only call phone numbers stored in
the Address Book. You must enter your PIN2.
]Number List: You can view the number list saved as
fixed dial number.
Note
Not all SIM cards have a PIN2. If your SmartChip does not,
this menu option is not displayed.
Change Codes (Menu 9.5.3)
The Change codes feature allows you to change your
current password to a new one. You must enter the
current password before you can specify a new one.
You can change the access codes: Security Code,
PIN1 Code, PIN2 Code
Note
PIN: Personal Identification Number.
Connection Menu 9.6
Change Frequency Band (Menu 9.6.1)
When the America(850/1900) option is selected the
device can be used in the US, and when the
Europe(1800) option is chosen the device can be used
in European countries.
Note
The US frequency is set at 850/1900 MHz and the European
frequency is set at 1800 MHz.
Note
Note of caution that depending on the SmartChip, the order
of the menu can differ. The World Phone menu option sets
the GSM frequency band between the GSM 850/1900 used in