Filter
Top Products
67
66
SettingsSettings
Network Settings
The Network Settings feature enables you to indicate whether the
network used when roaming(outside your home area) is selected
Automatic, Manual, and Preferred.
Automatic
Allows you to set the phone to automatically search for and select
one of the cellular networks available in your area.
The phone will be set to Automatic even though the power is off
and on.
Manual
Allows you to select the desired network manually from a list of
networks. If the connection to the manually selected network is lost,
the phone will sound an error tone and ask you to select a network
again. The selected network must have a roaming agreement with
your home network, that is, the operator whose SIM card is in your
phone. The phone lets you select another network if the phone fails
to access the selected network. If you switch off the phone, the
phone will be reset to Automatic.
Preferred
You can set a list of preferred networks the handset should attempt
to register with first, before attempting to register to any other
networks. This list is created from the handset’s predefined list of
known networks.
Menu 4.6
(Menu 4.6.1)
(Menu 4.6.2)
(Menu 4.6.3)
Note
You can select a network other than your home network only if
it has a valid roaming agreement with your home network.
]
Cancel all barrings: All call barring settings are deactivated;
calls can be made and received normally.
]
Change password: You can set and change the call barring
password obtained from your service provider using this option.
You must enter the current password before you can specify a
new one.Once you have entered a new password, you are
asked to confirm it by entering it again.
Fixed Dial Number (FDN)
Allows you to restrict your outgoing calls to selected phone
numbers, if this function is supported by your SIM card. The PIN2
code is required.
The following options are available:
]
Enable: You can only call phone numbers stored in the
phonebook. You must enter your PIN2.
]
Disable: You can call any number.
]
Number list: You can view the number list saved as fixed dial
number.
Change Codes
The Change codes feature allows you to change your current
password to a new one. You must enter the current password
before you can specify a new one.
You can change the access codes: Security code, PIN1 code,
PIN2 code
(Menu 4.5.3)
Note To use Call Barring service, you must input the network
password. When calls are barred, calls may be possible to
certain emergency numbers in some networks.
Note Not all SIM cards have a PIN2. If your SIM card does not, this
menu option is not displayed.
Note PIN: Personal Identification Number.
(Menu 4.5.4)
*
*
:
Shown only if supported by SIM card