Filter
Top Products
1. Paired Devices
Pairing is the process that allows
the handset to locate, establish
and register 1-to-1 connection
with the target device.
For pairing new Bluetooth
®
device
1. Press , , .
2. Follow the
Bluetooth
accessory instructions to set
the device to pairing mode.
3. Press Left Soft Key
Search and then New Search.
If
Bluetooth
power is set to
off, you will be prompted to
turn power on. Select Ye s
and press .
4. The device will appear in the
Found Devices menu once it
has been located. Highlight
the device and press .
5. The handset will prompt you
for the passkey. Consult the
Bluetooth
accessory
instructions for the
appropriate passkey (typically
“0000” - 4 zeroes). Enter the
passkey and press .
6. Once pairing is successful,
select Ye s and press
to connect with the device.
7.
Once connected, you will see
the device listed in the Paired
Devices menu with Bluetooth
connected icon.
Bluetooth
®
48
Bluetooth
®
Note
The
Bluetooth
features of this
handset may not be compatible
with all devices which are
Bluetooth
enabled; your service
provider or handset manufacturer
cannot be responsible for
compatibility with devices not sold
by the service provider or handset
manufacturer.
UX380_Eng_100.qxd 10/17/07 9:08 AM Page 48