Mitel LDP7004N/D Cell Phone User Manual


 
Menu Tree
7004N/D User Guide | Menu Tree 11
[1] RING
1.1 TYPE
1.2 ANSWER MODE
1.2.1 OHD (H)
1.2.2 TONE (T)
1.2.3 PRIVACY (P)
1.8 ICM RING
1.9 CO RING
[2] COS
2.1 COS DOWN
2.2 COS RESTORE
2.3 WALKING COS
[3] AUTH / MOBILE EXTN
3.1 AUTH REGISTER
3.2 AUTH CHANGE
3.3 REG MOBILE-EXT
3.4 ACTIVE MOBILE-EXT
[4] TIME / CONF-ROOM
4.1 SET WAKE-UP TIME
4.2 WAKE-UP DISABLE
4.3 ACTIVE CONF-ROOM
4.4 DEACTIVE-CONF ROOM
[5] MESSAGE
5.1 SET PRESELECTED MSG
5.2 SET CUSTOM MSG
[6] ANNOUNCEMENT
6.1 REC USER GREETING
6.2 LISTEN TIME/DATE
6.3 LISTEN STA NUMBER
6.4 LISTEN STA STATUS
6.5 REC PAGE MSG
6.6 ERASE USER GREETING
6.7 ERASE PAGE MESSAGE
[7] SUPPLEMENTARY
7.1 LCD DISPLAY LANGUAGE
7.3 BGM
7.4 REGISTER STA NAME
7.5 SPK/HEADSET
7.6 HEADSET RING MODE
7.7 WTU STA NUM RCVR
[*] SYSTEM (DO NOT USE)
This menu tree can be used for programming various advanced features. To enter the menu press
the [TRANS/PGM] button.
For detailed information on how to use the above menu tree there is a
full user guide available from www.cranetlg.co.uk/ipldk/userguides
General Functions
7004N/D User Guide | General Functions 04
Call Forward
1. Dial 554 from your handset.
3. Select a forward option as per below. (Example: Select option 4, Busy/No Answer)
4. Select the destination appropriate to the call forward type. (To select the integral messaging
card for options 1 to 4 press # - You will need permission to use this application).
5. To cancel the call forward dial 554, #.
Call Forward
It is possible to forward you phone in a number of ways. The options available are:
0 – Follow-Me (To forward calls from your extension to an extension at a temporary location.
The forward is activated at the temporary location. A valid authorisation code will be required).
1 – Unconditional (This option allows you to forward all calls immediately to a Station, Hunt
Group or the integral Voice Messaging card).
2 – Busy (Destination options are as per option 2. Calls will only forward when you are busy –
on the phone).
3 – No Answer (Destination options as per option 1. Calls will only forward when a ‘No-Answer’
timer expires. The length of the time is determined by a qualified System Administrator).
4 – Busy/No Answer (Combines options 2 & 3. Most popular, especially where Voicemail is
used).
5 – Off-Net (This allows you to forward your phone unconditionally to a remote location such as
Mobile or home phone using a speed dial).
6 – No Answer Off-Net (As per option 6 but only after a no-answer timer)
7 – Access Not Permitted
# - Allows you to cancel any call forward.