Filter
Top Products
8
Call Park - System
Set Retrieve
With a call in progress: From any station:
Press
Transfer Lift handset
Dial Call Park Set code
4
*
Dial Call Park Retrieval code 4#
Dial Call Park location 0-9 Dial Call Park Location 0-9
Replace handset Converse
Note:
If the dialled Call Park location is busy, dial another Call Park location (0-9).
Station Busy/No Answer Options
Automatic Callback
Set Answer
When calling a busy digital When both telephones are idle
telephone: originating telephone rings:
Dial Automatic Callback code
0 Lift handset
Replace handset Call is placed automatically
Callback Request
Set Answer
When calling a busy or Receive display and/or Feature
unanswered digital telephone: LED message indication:
Dial Callback Request code
# Lift handset
Replace Handset Dial
#; request originator is
automatically called
Repeat above procedure to
respond to additional messages
Note:
Callback messages are automatically cancelled once the originating station is
called. Callback Request access code # must be assigned in system programming.
Tone Override
Set Answer
When calling a busy digital telephone: With a call in progress:
Dial Tone Override code
*
Receive tone override signal †
to send tone Press
Hold
Wait for signalled party to answer Converse with second party
†If handsfree, a visual indication only (
*
) will be provided on the telephone’s display.
Note: An Override Tone will be sent each time
*
is pressed.
NEC Xen Phone UserGuide 18/7/2003 3:56 PM Page 8