Filter
Top Products
6
A
Tap the shutter icon.
The shutter will be released after you
remove your finger from the icon; the
resulting photo is first saved to the cam-
era memory card and then downloaded
to the iOS device. There is no need to
point the iOS device at the wireless mo-
bile adapter.
3
D Remote Photography
Remote photography ends automatically when the battery in the
camera or iOS device runs low. Note that using remote photogra-
phy for an extended period may cause the camera’s internal tem-
perature to rise; if necessary, remote photography will end auto-
matically to minimize damage to camera circuits.
The iOS device can not be used to adjust camera settings; use cam-
era controls to adjust settings before starting Step 1. Regardless of
the release mode selected with the camera, only one picture will
be taken each time you tap the shutter icon. Note that the display
may not update smoothly depending on the device and network
conditions.
A shutter speed of “Time” is available in mode M. Choose a shutter
speed of A on the camera and select Shoot > WMU on the
iOS device (page 7), then tap the shutter icon to open the shutter.
Shooting ends when the icon is tapped again.