Filter
Top Products
Settings
71
To pair with a device, you and the owner of the other device must agree on a pass
code of 1–16 numeric characters. The first time you try to connect the devices,
you must each enter the same pass code. Once the devices are paired, you will
not need to use the pass code again, so there is no need to remember it.
Paired devices are placed in your paired device list. You can view the list even
when Bluetooth connectivity is not active or when the devices in the list are not
available for connection.
Select Menu > Settings > Connectivity > Bluetooth > Paired devices > Options
and one of the following:
Assign short name—Give a nickname to the selected device (visible to you only).
Auto-conn. without confirmation—Select No if you want the phone to connect to
the selected device automatically or Yes if you want the phone to ask for your
permission first.
Delete pairing—Delete the pairing to the selected device.
Pair new device—Search for active devices with Bluetooth technology within
range, scroll to the desired device, and select Pair to establish pairing with that
device. Do not accept Bluetooth connectivity from sources you do not trust.
Bluetooth connectivity settings
To define how your phone is shown to other devices with Bluetooth connectivity.
Select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings and one
of the following:
My phone's visibility—Select Perm. visibil. to permanently show the phone to all
other devices with Bluetooth connectivity, Temp. visibil. to show the phone to all
other devices for a limited time, or Hidden to show the phone only to the paired
devices. Operating the phone in hidden mode is a safer way to avoid malicious
software.
My phone's name—Change your phone name that is seen by other users.
Set up a connection
1. Select Menu > Settings > Connectivity > Bluetooth > On. The active
Bluetooth technology connection is indicated by at the top of the display.
2. Select Search for audio enhancements to search for compatible devices with
Bluetooth connectivity. The list of found devices appears in the display.
3. Select the desired device. If required, enter the Bluetooth connectivity pass
code of the device to complete the pairing.