Filter
Top Products
Menu functions
126
Copyright
© 2003 Nokia. All rights reserved.
Keying in the service settings manually
1. Press Menu, and select Services, Settings and Connection settings.
2. Select Active service settings.
You need to activate the set where you want to save the service settings. A set
is a collection of settings needed for making a connection to a WAP service.
3. Scroll to the set you would like to activate and press Activate.
4. Select Edit active service settings.
Select each of the following service settings one by one and key in all the
required settings.
• Settings' name - Key in the new name for the connection set and press OK.
• Homepage - Key in the homepage address of the WAP service that you
want to use, press for a dot, and press OK.
• Session mode - Select Permanent or Temporary.
• Connection security - Select On or Off.
When the connection security is On, the phone tries to use a secure
connection with the WAP service. If a secure connection is not available,
the connection will not be made. If you wish to connect anyway, with a
non-secure connection, you must set the connection security to Off.
• Data bearer - Select GSM data or GPRS. Settings for the selected bearer, see
Settings when GSM data is the selected data bearer and Settings when
GPRS is the selected data bearer below.