Filter
Top Products
Get started
12
4. Close the microSD card holder (4), and slide to lock.
5. Insert the battery, and back cover.
Important: The microSD card must be inserted in the slot with the contact
area facing the inside of the device.
■ Charge the battery
Your battery has been partially charged
at the factory. If the device indicates a
low charge, do the following:
1. Connect the charger to a wall
socket.
2. Connect the charger to the device.
3. When the device indicates a full charge, disconnect the charger from the
device, then from the wall outlet.
You do not need to charge the battery for a specific length of time, and you can use
the device while it is charging. If the battery is completely discharged, it may take
several minutes before the charging indicator appears on the display or before any
calls can be made.
■ Connect a headset
You can connect a universal 2.5 mm
headset to your device.