— Adjust the white balance. Select the current lighting conditions. This allows
the camera to reproduce colours more accurately.
— Adjust the exposure compensation (images only). If you are shooting a dark
subject against a very light background, such as snow, adjust the exposure to +1 or
+2 to compensate for the background brightness. For light subjects against a dark
background, use -1 or -2.
— Adjust light sensitivity (images only). Increase the light sensitivity in low light
conditions to avoid too dark images and blurry images. Increasing the light
sensitivity may also increase the image noise.
— Adjust contrast (images only). Adjust the difference between the lightest and
darkest parts of the image.
— Adjust sharpness (images only).
The screen display changes to match the settings you define.
The capture settings are shooting-mode specific. Switching between the modes
does not reset the defined settings.
If you select a new scene, the capture settings are replaced by the selected scene.
You can change the capture settings after selecting a scene if needed.
Saving the captured image may take longer if you change the zoom, lighting, or
colour settings.
Capture images
When capturing an image, note the following:
● Use both hands to keep the camera still.
● The quality of a digitally zoomed image is lower than that of a non-zoomed
image.
● The camera goes into battery saving mode if there are no actions for about a
minute. To continue capturing images, select Continue.
To capture an image, do the following:
1. To switch from video mode to image mode, if necessary, select
> .
Camera
© 2010 Nokia. All rights reserved.70