The capture and recording settings return to the default settings after you close the
camera.
Select from the following:
—
Select the scene.
or —
Switch between video and image mode.
or —
Show or hide the viewfinder grid (images only).
—
Activate the self-timer (images only).
—
Activate sequence mode (images only).
—
Open Gallery.
Image settings:
—
Select a colour effect.
—
Adjust the white balance. Select the current lighting conditions. This allows
the camera to reproduce colours more accurately.
—
Adjust the exposure compensation (images only). If you are shooting a dark
subject against a very light background, such as snow, adjust the exposure
to +1 or +2 to compensate for the background brightness. For light subjects
against a dark background, use -1 or -2.
—
Adjust light sensitivity (images only). Increase the light sensitivity in low
light conditions to avoid too dark images and blurry images. Increasing the
light sensitivity may also increase the image noise.
—
Adjust contrast (images only). Adjust the difference between the lightest
and darkest parts of the image.
—
Adjust sharpness (images only).
The screen display changes to match the settings you define.
The capture settings are shooting-mode specific. Switching between the modes
does not reset the defined settings.
86 Camera