Filter
Top Products
Tools
71
Calls on both lines can be answered irrespective of the selected line. You
cannot make calls if you select Line 2 and have not subscribed to this
network service. To prevent line selection, select Line change > Disable
if supported by your SIM card. To change this setting, you need the PIN2
code.
Connection
Your phone supports packet data connections , such as GPRS in the
GSM network. See “Indicators,” p. 19. To establish a data connection, an
access point is required. You can define different kinds of access points:
• MMS access point to send and receive multimedia messages
• Access point for the Web application to view WML or XHTML pages
• Internet access point (IAP) (for example, to send and receive e-mail)
Check which kind of access point you need with your service provider for
the service you wish to access. For availability and subscription to
packet data connection services, contact your network operator or
service provider.
Receive access point settings
You may receive access point settings in a message from your service
provider, or you may have preset access point settings in your phone.
Access points
To create a new access point or edit an existing access point, select
Menu > Tools > Settings > Connection > Access points > Options >
New access point or Edit. If you create a new access point, use the
settings of an existing access point as a basis by selecting Use existing
settings, or start with default settings by selecting Use default settings.
Follow the instructions from your network operator or service provider.
Connection name — to give a descriptive name for the connection
Data bearer — The options are Packet data, Data call, and High speed
(GSM). Depending on what data connection you select, only certain
setting fields are available. Fill in all fields marked with Must be defined
or with an asterisk. Other fields can be left empty, unless you have been
instructed otherwise by your service provider.