Filter
Top Products
105Copyright © 2006 Nokia. All rights reserved.
Make a PTT call to multiple recipients
You can select multiple PTT contacts from the contact list. The recipients receive
an incoming call and need to accept the call in order to participate. If supported
by your network operator, you also may select contacts with a phone number but
without PTT number. For details, contact your network operator.
1. Select Menu > Push to talk > Contacts list, and mark the desired contacts.
2. Press the volume up key briefly to start the call. The participating contacts are
shown on the display, as soon as they join the call.
3. Press and hold the volume up key to talk to them. Release the volume up key to
hear the response.
4. Press the end key to terminate the call.
Receive a PTT call
A short tone notifies you of an incoming PTT call. Informations, such as the
channel, the phone number, or the nickname (network service) of the caller are
displayed.
You can either accept or reject an incoming one-to-one call if you have set the
phone to first notify you of the one-to-one calls.
When you press the volume up key while the caller is talking, you hear a queuing
tone, and Queuing is displayed. Press and hold the volume up key, and wait for the
other person to finish; then you can talk immediately.