Filter
Top Products
43
Listen to voice messages
This feature allows you to access your voice messages.
See “Voice messages” on page 71 for complete details.
Lock code
You’ll need the lock code to activate and deactivate
Phone Lock (see
page 52
), or to change your lock
code. The default lock code is 1234. If you enter an
incorrect lock code five times in a row,
your
phone will
prompt you for the security code (see
page 62
).
Changing your lock code
In a lock code, only numeric characters are accepted.
1. Enter
Menu
4 3 2 3 (
Settings
-
Security settings
-
Access codes
-
Change lock code
)
2. Enter lock code at
Enter lock code:
and press
OK
3. Enter new lock code, press
OK
4. Verify new lock code, press
OK
Note: When you change your lock code, make sure you store it
in a safe place, away from your phone. Avoid entering access
codes similar to emergency numbers to prevent accidental
emergency calls.
Manual touch tones
This setting determines how long touch tones are pro-
duced as you press the keys on the keypad. Note that
touch tones are sometimes called DTMF tones.
See “Touch tones” on page 68 for details.
Setting manual touch tones
Press
Menu
4 2 3 1 (
Settings
-
Phone settings
-
Touch
tones
-
Manual touch tones
) and highlight one of the
following options, then press
OK.
Continuous
means the tone sounds for as long as
you press and hold the key.