72Copyright © 2006 Nokia. All rights reserved.
Always online — to set the phone to automatically register to an packet data network when you switch the
phone on. or indicates that the GPRS or EGPRS service is available.
If you receive a call or a text message, or make a call during a GPRS or EGPRS connection, or indicates
that the GPRS or EGPRS connection is suspended (on hold).
Packet data settings
You can connect the phone using Bluetooth wireless technology, infrared, or USB data cable connection to a
compatible PC and use the phone as a modem to enable EGPRS or GPRS connectivity from the PC.
To define the settings for EGPRS or GPRS connections from your PC, select Menu > Settings > Connectivity >
Packet data > Packet data settings > Active access point, and activate the access point you want to use. Select
Edit active access point > Alias for access point, enter a name to change the access point settings, and select
OK. Select Packet data access point, enter the access point name (APN) to establish a connection to an EGPRS
or GPRS network, and select OK.
You can also set the EGPRS or GPRS dial-up service settings (access point name) on your PC, by using the One
Touch Access software. See Nokia PC Suite p. 112. If you have set the settings both on your PC and on your
phone, the PC settings are used.
Data transfer and synchronization
Synchronize your data from calendar, notes, and contacts with another compatible device (for example, a
mobile phone), a compatible PC, or a remote Internet server (network service).
Your phone allows data transfer with a compatible PC or another compatible device when using the phone
without a SIM card. Note that when you use the phone without a SIM card, some functions appear dimmed in
the menus and cannot be used. To synchronize with a remote Internet server is not possible without a SIM card.
To copy or synchronize data from your phone, the name of the device and the settings must be in the list of
partners in transfer contacts. If you receive data from another compatible device, the partner is automatically
added to the list, using the contact data from the other device. Server sync and PC sync settings are the original
items in the list.