Filter
Top Products
13
Get started
4. Close the SIM card holder, and push forward until it locks into place (7).
Insert the memory card and battery
1. To insert the memory card, press it into the slot until it locks into place (1).
2. Ensure the card is properly inserted with the contact surface area face
down (2).
3. Observe the battery contacts, and insert the battery (3, 4).
4. Replace the back cover (5, 6).
■ Charge the battery
Always switch the device off and disconnect the charger before removing the battery.
Your battery has been partially charged at the factory. If the device indicates a
low charge, do the following:
1. Connect the charger to a wall socket.
2. Connect the charger to the device.
3. When the device indicates a full charge, disconnect
the charger from the device, then from the wall
outlet.