Filter
Top Products
15
Display 34 – FBUS display
************** ##############
*aabbccdd * #CM LD LM NM #
*eeefff - ggg* #PEC FEC OEC #
*hhh iii jjj * #ACC RXS TXS #
*k-- * #Mod #
************** ##############
aa current fbus media in hex
bb last sender dev in hex
cc last sender media in hex
dd Next media to be connected. Same as aa if the connection is not pending.
eee fbus parity error counter
fff fbus framing error counter
ggg fbus overrun error counter
hhh fbus alive check counter
iii RX Sequence number
jjj TX Sequence number
k Phone mode: S=slave, H=host
Display 35 – Reasons for SW resets
************** ##############
*aaaaa * #Reset reason#
*bbbbbbbb * #Task name #
* * # #
* * # #
************** ##############
aaaaa last reset reason.
NORM : Probably normal power up.
UNKNO : Default value, reset reason is unknown.
HW WD : ASIC watchdog timeout.
SWDSP : DSP recovery reset
SWSIM : SIM contact failure reset
SWIDL : Idle task not running reset
STACK : Task stack overflow
bbbbbbbb Name of running task before reset.
Display 36 – Counters for resets
++++++++++++++
+ aa bb cc +
+ dd ee ff +
+ +
+ +
++++++++++++++
aa Unknown resets
bb ASIC watchdog resets
cc DSP recovery resets
dd SIM contact failure resets
ee Idle task not running resets
ff Task stack overflow resets