Filter
Top Products
©2001 Nokia Corporation. All rights reserved.
Menu functions
83
Menu functions
Keying in the service settings manually
1. Press Menu, select Services, and Settings.
2. Select Active service settings.
You need to activate the set where you want to save the service settings. A set is a collection of
settings needed for making a connection to a WAP service.
3. Scroll to the set you would like to activate and press Activate.
4. Select Edit active service settings.
5. Select each of the service settings one by one and key in all the required settings.
• Settings name - Key in the new name for the settings set and press OK.
• Homepage - Key in the homepage address of the WAP service that you want to use, press
for a period, and press OK.
• Session mode - Select Permanent or Temporary.
• Connection security - Select On or Off.
When the connection security is On, the phone tries to use a secure connection with the WAP
service. If a secure connection is not available, the connection will not be made. If you wish to
connect anyway, with a non-secure connection, you must set the connection security to Off.
• Data bearer - Select GSM data or GPRS. For pricing, connection speed and other information,
contact your network operator or service provider.
The following options depend on the selected data bearer:
When GSM data is the selected data bearer:
• Dial-up number - Key in the phone number and press OK.