Filter
Top Products
59
■ Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To help ensure that you are getting an
original Nokia battery, purchase it from a Nokia authorized service centre or dealer, and
inspect the hologram label using the following steps:
Authenticate hologram
1. When looking at the hologram on the label, you should see the
Nokia connecting hands symbol from one angle and the Nokia
Original Enhancements logo when looking from another angle.
2. When you angle the hologram left, right, down, and up, you
should see 1, 2, 3, and 4 dots on each side respectively.
Successful completion of the steps is not a total assurance of the
authenticity of the battery. If cannot confirm authenticity or if you
have any reason to believe that your Nokia battery with the
hologram on the label is not an authentic Nokia battery, you should
refrain from using it, and take it to the nearest Nokia authorized
service centre or dealer for assistance.
For additional information, refer to the warranty and reference leaflet included with your
Nokia device.
Taking care of your device
Your device is a product of superior design and craftsmanship and should be treated with
care. The following suggestions will help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can
contain minerals that will corrode electronic circuits. If your device does get wet, remove
the battery, and allow the device to dry completely before replacing it.
• Do not attempt to remove the battery from the device. Nokia recommends that you take
the device to the nearest authorized service facility for replacement of the battery.
• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
• Do not store the device in high or cold temperature. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain plastics. When the
device warms to its normal temperature from a cold temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed in this guide.