Nokia 9110 Communicator
06.09.99
Copyright 1995 – 1999 Nokia. All right reserved.
1(3)
QUICK GUIDE FOR CONFIGURING INTERNET SETTINGS
This document is a Quick Guide for configuring Internet settings before accessing the Internet. Information
concerning the settings must be obtained from Internet service provider. The service provider may be able to
configure the access point for you via a special SMS message, or a WWW page, which sets all the necessary
Internet access settings. To define the Internet settings manually, press Settings in the main view of the
Internet application.
To define an Internet access point
1 In the Internet settings main view choose Internet access and press Change.
2 To define a new Internet access point, press New. To modify or change an existing IAP, press Edit.
Note: The Internet settings apply to Mail, WWW and Telnet.
The Internet settings are:
Modem initialisation — Enables you to define the modem settings of your communicator.
Autobauding — The data transmission rate is determined automatically. Most networks
support this option.
Fixed 9600 b/s — A fixed data transmission rate is used. If you have problems with making a
data call, try this option.
Fixed 14400 b/s — Can be used if supported by the network. Do not use this option, unless you
are sure your network supports it.
Custom — When a data call is established, the modem is initialised according to the string you
enter here.
