Nokia 9110 Cell Phone User Manual


 
Copyright. 1998. Nokia Mobile Phones. 3(4)
Note: IAP (Internet Access Point) and email settings has to be configured before you can send
any email.
Sending image as logo or signature file via fax:
Before writing a fax, go to fax application and press Settings. Choose Logo file or Signature file
(using the arrow keys of the communicator) and press Change. Choose the image from the list
and press Ok.
Then press Close and start writing the fax. The image will be attached to the fax when the
communicator is sending the fax.
Note: If you send the image as a Logo or a Signature file in a fax, the quality will be limited by
the the Send resolution in the Fax settings of your communicator - see the 9110 User Manual
for more information. Also the fax machine performance may limit the quality of the final paper
copy.
How to attach an image to a contact card:
Image files must be in .jpg format and saved in a sub-folder named Contact Images the
Downloaded files folder.
Go to the Contact Application in 9110, choose the appropriate contact. Press
Open_Options_Attached Image. Select the right image from the list and press Ok. Then press
Close and you should see the image on the right upper corner of the contact card.
TROBLESHOOTING
Q: Communicator cant establish the connection to the digital camera
A: Check that the infrared of the camera and the infrared of the communicator are facing
together propeply and there is nothing between the infrared links to disturb the connection.
Check also that your digital camera supports Ir Tran-P –protocol.
Q: I cant open the image with my PC.
A: You may have forgot to convert the image to .JPEG format. Check the format and change it
in the communicator if necessary.
Q: I cant select the image from the list.
A: The image is saved in wrong format or wrong place. When adding image to the contact card
it has to be saved in .JPG format in Downloaded files under Contact Images folder. To send the
image to an Ir Tran-P device the image has to be saved under Downloaded files in .UPF format.
To send the image as email or select it as logo or signature file in fax, the image has to be
saved under Downloaded files. The images for logo or signature file has to be saved as .JPG or
.GIF format.