Filter
Top Products
107Copyright © 2004 Nokia. All rights reserved.
3. Scroll to the connection set you would like to activate and press Activate.
You need to activate the connection set where you want to save the service
settings. A connection set is a collection of settings required to make a
connection to a service.
4. Select Edit active service settings.
Select each of the settings one by one and key in all the required settings
according to the information you have received from your network operator or
service provider.
• Settings' name - Key in the new name for the connection set.
• Homepage - Key in the homepage address (start page) of the service that
you want to use, press for a dot.
• Session mode - Select Permanent or Temporary.
• Connection security - Select On or Off.
When the connection security is On, the phone tries to use a secure
connection with the service. If a secure connection is not available, the
connection will not be made. If you wish to connect anyway, with a non-
secure connection, you must set the connection security to Off.
• Data bearer - Select GSM data or GPRS. Settings for the selected bearer, see
Settings when GSM data is the selected data bearer and Settings when
GPRS is the selected data bearer below.
For pricing, connection speed and other information, contact your network
operator or service provider.