Filter
Top Products
75Copyright © 2006 Nokia. All rights reserved.
Preferred access point — to view the saved access points. Scroll to an access point, and select Options > Details
to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.
Connect to serv. support — to download the configuration settings from your service provider if this is
supported by the service provider
Personal config. settings — to add new personal accounts for various services, and to activate or delete them.
To add a new personal account if you have not added any, select Add; otherwise, select Options > Add new.
Select the service type, and select and enter each of the required parameters. The parameters differ according
to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or
Activate.
■ Security
When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing) calls still may
be possible to the official emergency number programmed into your device.
Select Menu > Settings > Security and from the following options:
PIN code request and UPIN code request — to set the phone to ask for your PIN or UPIN code every time the
phone is switched on. Some SIM cards do not allow the code request to be turned off.
PIN2 code request — to select whether the PIN2 code is required when using a specific phone feature which is
protected by the PIN2 code. Some SIM cards do not allow the code request to be turned off.
Call barring service — to restrict incoming calls to and outgoing calls from your phone (network service). A
barring password is required.
Closed user group — to specify a group of people whom you can call and who can call you (network service)
Security level > Phone — to set the phone to ask for the security code whenever a new SIM card is inserted into
the phone. If you select Security level > Memory, the phone asks for the security code when the SIM card
memory is selected, and you want to change the memory in use.
Access codes — to change the security code, PIN code, PIN2 code, or barring password