Filter
Top Products
14
Operation
Press and hold the button to check for channel activity. If
you hear static, the channel is clear for use. Your radio has 40
channels. If you are in a group and you wish to talk to each other,
all radios must be set to the same channel and interference
eliminator code (CTCSS). If you experience interference and need
to change channel, ensure that you change the channel and code
of all radios in your group.
1. For maximum clarity, hold radio 5 to 7cm’s from mouth.
2. Press and hold
and speak to the microphone. LED indicator
light glows continuously when transmitting.
3. To receive messages, release
.
Interference eliminator codes (CTCSS)
The radio has 38 interference eliminator codes (CTCSS) providing
you with a choice of channel/code combinations to listen to
transmissions using the same CTCSS code on the same channel,
effectively blocking out unwanted conversations.
1. Press
until the code number begins to flash.
2. Use
or to select required CTCSS code 0 (off) or 1-38.
3. Press
to set the new code.
You can specify a different code for each channel.
1. To set a channel and CTCSS code combination, press and
then press or to select the channel.
2. Press
again and then press or to select a CTCSS
code.
3. You can not select interference eliminator codes on channel 5
or channel 35. On this channel press
. The radio shall skip
the codes setting.
4. Press
to exit the menu and to save the channel and code
combination.
To set another channel and code combination, repeat these steps.