Panasonic II Cell Phone User Manual


 
HEADSET Pairing:
1. Bring the mobile phone at about 20cm from the SuperTooth II.
2. SuperTooth II is initially off. Turn it on by flipping up the
Swivel Arm (1) b 55° position. The Bluetooth Indicator(9)
will glow (blue blink).
3. Simultaneously press the Reject Button (2) and Pick-
Up/Hang-Up Button (7) for about 10seconds. A distinctive
tone will be heard and The Bluetooth Indicator LED will
change from blinking blue to alternate blinking red and blue.
4. Press Pick-Up/Hang-Up Button (7) again. Press shortly
(release immediately). Bluetooth indicator blinking will be
faster. The SuperTooth II is now in Headset Pairing Mode.
5. While the kit is at pairing mode, access the Bluetooth menu of your phone.
(Kindly refer to your phone's manual.) Turn on its Bluetooth function then execute
a Bluetooth search so that it will be able to search and find your SuperTooth II.
When the phone displays the list of the Bluetooth devices it found, select the
name of this kit (SuperTooth II).
6. When the phone asks for a passcode, enter "0000".
7. Pairing is successful if the alternating red/blue lights of Bluetooth Indicator(9)
will stop and then change to plain blinking blue. Normally, the phone would also
show briefly on its display if it’s already paired and connected to SuperTooth II or
if pairing with it failed.
Note: If pairing failed, repeat the procedure.
If pairing succeeded, then your SuperTooth II kit is now ready to use.
You can now make or answer a call using your kit Instead of your phone.