Filter
Top Products
ANSWERING A CALL
When the phone receives a call, ring tone is possible on SuperTooth II and at the same
time on the telephone (depending on your phone model).
1. Just shortly press Pick-Up/Hang-Up Button(7) to answer the call.
2. When communication is over, press the Pick-Up/Hang-Up Button(7) to terminate
the call.
MAKING A CALL USING THE SUPERTOOTH II
Normal dialing
1. Enter the contact number and send. Normally, audio will be on the kit.
Note: With some phones like Siemens S55; Panasonic X70, audio is always
on the phone during an outgoing call. You will need to press Pick-Up/Hang-
Up Button(7) to transfer the audio to your kit. (Also refer to "Compatibility
Table" for other helpful remarks.)
2. When communication is over, press the Pick-Up/Hang-Up Button(7) to terminate
the call.
Voice dialing
1. First you have to access the voice dialing function of your phone, turn it
on and
record for a voice name or voice tag. (Kindly refer to the
procedure in your
phone's manual.)
Note: Voice dialing entries must be stored in the phone's memory, not on
the SIM card!
When done, execute voice dialing on your kit by proceeding with the instructions.
2. Shortly press Pick-Up/Hang-Up Button(7).
3. A beep will then be heard on the SuperTooth II prompting the user to say a voice
name or voice tag of a person to call.
4. Say the name. The name will be played back to you (audio on kit). The phone will
then place the call automatically.
5. When communication is over, press the Pick-Up/Hang-Up Button(7) to terminate
the call.
Note: Noisy environment could affect voice recognition. Record your voice in a quiet
environment.
Redialing (Handsfree profile only)
Make a long press on the Pick-Up/Hang-Up Button(7). Audio will be on the SuperTooth II.