Filter
Top Products
18 Basic Operations
Swap
When you are connected to two calls, you can switch to the
other calls.
During a call:
@(Swap) to change to the other call.
DTMF
DTMF can be sent during a conversation. These are often
used to access voice mail, paging and computerised home
banking. For example, you may need to enter a number to
remotely access voice mail messages. A phone number may
be stored in the Contacts together with a DTMF sequence,
allowing the number to be dialled upon recall and the DTMF
number to be sent automatically.
Send DTMF during a call:
Enter digits (
#~,, ! or ").
Pause dial
Using pauses allows you to send DTMF automatically.
1. Enter the phone number
2. Press and hold
# until a “P” is displayed at the end of
the phone number entered
3. Enter DTMF digits after the pause, e.g. enter the number
to access voice mail messages
4.
C
¾
When the call is connected the DTMF sequence will be
sent after 3 seconds.