Filter
Top Products
Using Withhold ID it is possible to check if you send
Calling Line Identification information when you make a
call. When checking the Status of Withhold ID the
telephone must be registered with a network.
Call Charge will set the cost of each unit for call charge
information and the required currency in which call
charge is displayed.
Using Max. Cost can restrict use of the telephone to a
specified number of units.
NOTE:The duration of one unit may vary during the day,
peak and off-peak times. Therefore, the call charge can
be calculated accordingly. However, call charge
information may not give an accurate reflection of the
tariffs charged by your Service Provider.
Call Divert
When Call Divert is enabled the divert icon (t)is
displayed.
You can divert voice, fax and data calls using different
circumstances and to different telephone numbers.
When updating or checking the Status of Call Divert the
telephone must be registered with a network.
Security
There are three types of security code for your
telephone:
Lock Code: Controls telephone security - Phone Lock.
Factory-set to “0000”.
PIN: Controls SIM security.
PIN2: Controls security for Fixed Dial Store and Call
Charge metering.
It is recommended that you memorise your security
codes. If you need to make a note of your security codes,
never write them in a way that they can be recognised by
another person. If you forget them contact your dealer for
the lock code or your Service Provider for PIN and PIN2.
Phone Lock will prohibit normal operation of the
telephone. Only emergency calls can be made and
received calls answered. Once the Phone Lock is
23
Call Divert
Voice Calls
Fax Calls
Data Calls
CancelAll
Status
Security
Bar Voice
Bar Fax
Bar Data
CancelAll
Status
Password
Phone Lock
Call Bar
PIN
PIN2
Fixed Dial