Filter
Top Products
Before Operating the PS
11
PBX Feature Menu
Functions of the PS can be activated through the display key list.
Move the joystick left to display the key list.
Flexible Key Display
The flexible key can be used to seize an line while making or receiving an outside call (F-
CO key), or used as a function key. Move the Joystick right to display the F-CO key list.
Icons shown in the F-CO list function similarly to the LED indicator on a Proprietary
Telephone; is the same as a green LED, and is the same as a red LED.
Pause:
Inserts a dialling pause.
FWD/DND:
Sets Call Forwarding or Do Not Disturb.
Message:
Used to leave a message waiting indication or
call back the party who left you a message
waiting indication.
Search Wave:
Searches the strongest radio signal coming
from the Cell Station.
PBX Program:
Used to enter programming mode.
• * The meanings of these icons vary depending on the status of the CO line.
• For further information, refer to “LED Indication” in the KX-TDA series Business
Telephone System Feature Guide.
• To select a key, press its key number, or move the Joystick to select the
desired key then press .
• To assign a function to a flexible key, see page 39.
Pause
3
1
2
0
1
2
3
0
1:Single line
2:Trunk Group
3:Loop line
Example:
Understanding the F-CO Key List*
(on): You are currently using this line.
(flashing rapidly): You have an incoming call on this line.
(flashing slowly): You have a call on hold on this line.
(on): This line is in use by someone else.
(flashing rapidly): There is an incoming call received by an
incoming call distribution group to which
“Ring” is set as the group call distribution
method.
(flashing slowly): Someone has a call on hold on this line.
(no icon): This line is idle.
key number