Filter
Top Products
Troubleshooting
44
Troubleshooting
Troubleshooting
Problem Description and Solution
The PS does not work. • The battery is drained.
→ Charge the battery fully. (See “Battery Charge” on page 7.)
• The PS has been cancelled or the PS has not been
registered.
→ Consult your dealer.
• The power is OFF.
→ Turn it ON. (See “Power On/Off” on page 8.)
The PS does not ring. • Ringer volume is set to “Off”.
→ Adjust the ringer volume level. (See “Ringer Volume
Adjustment” on page 13.)
You cannot make/receive a call. • The PS is out of range or the Cell Station (CS) is busy.
→ Move closer to the CS or try again later.
• The radio channel is busy or a radio communication error
occurred.
→ Try again later.
You cannot dial. • The number which you dialled is restricted by the
Business Telephone System.
→ Consult your dealer.
• The key lock mode is ON.
→ To cancel the mode, press the Joystick for about 2
seconds. (See “Key Lock” on page 13.)
• The radio channel is busy or a radio communication error
occurred.
→ Try again later.
Noise is frequently heard. → Set the PS and CS away from other electrical appliances.
→ Move closer to the CS.
“CS BUSY” is displayed. • When the Cell Station is busy, the PS will sound a search
tone. If the PS does not find an available Cell Station, a
busy tone will be heard.
→ Try again later.
“PS Not Connected” is
displayed.
• The called PS is out of range or the PS is power off.
→ Try again later.
The PS stops working during
operation.
→ Turn the power OFF and ON, then try again. (See “Power
On/Off” on page 8.)
→ Reinsert the batteries and try again. (See “Battery
Installation” on page 7.)