Panasonic KX-TG7733 Carrying Case User Manual


 
2 Enter the desired name (max. 10
characters; see the character table,
page 30).
R If not required, go to step 3.
3 MSAVEN
4 MbN: Select the desired setting. a
MSELECTN 2 times
5 MOFFN
Call block (Caller ID subscribers
only)
This feature allows the unit to reject calls when:
the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”,
page 41).
the unit receives a call without phone
number (“Blocking incoming calls without
phone number”, page 41).
When a call is received, the unit rings for a
short time while the caller is being identified. If
the phone number matches an entry in the call
block list:
cellular calls are rejected.
landline calls are disconnected after the
unit first sends out a busy tone to the caller.
Important:
R When the unit receives a call from a
number that is stored in the call block list or
a call without a recognized phone number,
the call is logged in the caller list
(page 44) with after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call block list.
Important:
R We recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
n From the caller list:
1 MFN CID
2 MbN: Select the entry to be blocked.
R To edit the number, press
MSELECTN, then press MEDITN
repeatedly until the phone number
is shown in the 10-digit format.
3 MSAVEN
4 MbN: Call block a MSELECTN
5 MbN: Yes a MSELECTN
6 Edit the phone number if necessary
(24 digits max.).
7 MSAVEN a MOFFN
n By entering phone numbers:
1 MMENUN#217 a MADDN
2 Enter the phone number (24 digits
max.).
R To erase a digit, press MCLEARN.
3 MSAVEN a MOFFN
Blocking incoming calls without
phone number
You can reject a call when no phone number
is provided, such as a call just showing Out
of area.
1 MMENUN#240
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Viewing/editing/erasing call block
numbers
1 MMENUN#217
2 MbN: Select the desired entry.
R To exit, press MOFFN.
3 To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: Yes a MSELECTN
a MOFFN
Note:
R When editing, press the desired dial key to
add, MCLEARN to erase.
R When viewing, Block w/o num is
displayed if the blocking incoming calls
without phone number feature is turned on.
For assistance, please visit http://www.panasonic.com/help
41
Programming