Filter
Top Products
Answering system for
landline
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting only” as the recording
time setting (page 53).
Important:
R Only 1 person can access the answering
system (listen to messages, record a
greeting message, etc.) at a time.
R When callers leave messages, the unit
records the day and time of each message.
Make sure the date and time have been set
correctly (page 17).
R When the cellular line only mode is set
(page 20), the answering system cannot be
used and any messages are not received.
Memory capacity (including your
greeting message)
The total recording capacity is about 18
minutes. A maximum of 64 messages can be
recorded.
Note:
R When message memory becomes full:
– “Messages full” is shown on the
handset display.
– The ANSWER ON/OFF indicator on the
base unit flashes rapidly if the answering
system is turned on.
– The message counter on the base unit
flashes if the answering system is turned
on.
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
Turning the answering
system on/off
Base unit
Press MANSWER ON/OFFN to turn on/off the
answering system.
Handset
1 To turn on:
MMENUN#327
To turn off:
MMENUN#328
2 MOFFN
Note for base unit and handset:
R When the answering system is turned on:
– The ANSWER ON/OFF indicator on the
base unit lights up.
– The message counter on the base unit
displays the total number of messages
(old and new).
Call screening
While a caller is leaving a message, you can
listen to the call through the unit’s speaker.
Handset
To adjust the speaker volume, press MjN or
MkN repeatedly. You can answer the call by
pressing M N. Call screening can be set for
each handset. The default setting is “On”.
1 MMENUN#310
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Base unit
*1
*1 KX-TG7741 series: page 3
To adjust the speaker volume, press MjN or
MkN repeatedly. You can answer the call by
pressing MSP-PHONEN.
To turn off while screening a call, press MkN
repeatedly until the sounds goes off.
R If you adjust the speaker volume while
listening to messages or having a
conversation, the speaker volume for call
screening is turned on again.
For assistance, please visit http://www.panasonic.com/help
49
Answering System for Landline