Filter
Top Products
C
H
4
67
SETTINGS
C
H
4
66
SETTINGS
To adjust the display contrast:
CONTRAST
1
Press [MENU] .
MAIN LCD/SUB LCD
To save, press .
2
3
Select “Main LCD” or “Sub LCD”, then select one
of the following options with the Navigation Key.
Main LCD : Level 1~5.
Sub LCD : Level 1~5.
l
l
Backlights the display and key pad for easy viewing in dark places.
BACKLIGHT
3
To save, press .
1
Press [MENU] .
LCD/KEY PAD
2
Select “LCD” or “Key Pad”, then select one of
the following options with the Navigation Key.
LCD : 5 Secs/15 Secs/30 Secs/60 Secs/Always On.
Key Pad : 5 Secs/15 Secs/30 Secs/60 Secs/
Always On/Always Off.
l
l
DATA SERVICE
2
Select one of the following connection modes
with the Navigation Key.
3
Press to activate.
This function is available only when the phone is connected
to a data cable. (The USB data cable is not supplied in the
package. Please purchase near store).
CONNECTION
1
Press [MENU] .
In Connection, you can set your phone to Voice Call, Data Only or
Fax Only. This function works with a USB data cable that connects
your phone to your PC. (See NOTE below.)
Voice Call : To receive a voice call.
Data Only : To receive data when connected to PC.
Fax Only : To function as a fax when connected to PC.
l
l
l
2
Select “Auto”, “1x Only” or “QNC Only” with the
Navigation Key.
3
To save it, press .
WAP/BREW
1
Press [MENU] .
This is a setup for the data service that you preferred. When "Auto"
is set, "1X Only" or "QNC Only" is automatically selected, depending
on data service the network provides. "1X Only" uses packet data
technology, while "QNC Only" uses circuit switched data technology.