Philips 625 Cell Phone User Manual


 
9
Getting
started
Enter the PIN code
1 To switch on the phone, press and hold the
)
key.
2 When you switch on the phone, you may be prompted to enter the PIN
code, which is the 4 to 8-digit secret code of your SIM card to protect it
from abusive use. It is preconfigured and communicated to you by your
operator or retailer. To personalise the PIN code, see Change codes
page 30.
L
If you enter a wrong PIN code 3 times, your SIM card is blocked. To unblock it,
you must request the PUK code from your operator.
3 Enter your PIN code. If you make a mistake, press
e
. Then confirm by
pressing
,
or
#
.
Set date and time
As prompted by the phone at first switch on, set the date by pressing the
appropriate numeric keys (press
e
to erase a number), then press
,
to
validate. Proceed in the same way to set the time.
L
For complete date and time options, see page 31.
Copy of the SIM phonebook
L
If you do not copy the SIM phonebook at very first switch, you will be able to do
it directly from the phonebook menu (see page 41).
If you had a mobile phone before and are using the same SIM card, the card
might contain all or part of your current phonebook. The mobile phone detects
this and a message asks you if you want to copy your SIM phonebook onto the
built-in phonebook (see below). Press
e
to cancel or
,
to accept.
Accept the copy
Press
,
to accept the copy of the SIM phonebook onto your phone. Once the
copy is done, the phonebook located on your phone is automatically set as
4 Put the back cover back on your phone:
hook the front housing onto the hinges on
the top of the phone (1), then press the
bottom down until latch catches (2).
5 Remove the protective film before using the
phone.
Fisio625_GB_4311 255 53832.book Page 9 Vendredi, 25. octobre 2002 6:10 18