Philips 625 Cell Phone User Manual


 
Getting
started
12
Charge the battery
Your phone is powered by a rechargeable battery. A new battery is partially
charged and an alarm will warn you when the battery reaches low.
L
We recommend that you do not remove the battery when the phone is switched
on: you may lose all your personal settings (see information on battery safety,
page 82).
1 Once the battery and battery cover are clipped on the phone, plug the
charger (supplied with the phone, in the box) into the right hand socket
at the base of the phone as shown below.
2 Plug the transformer unit into a main AC power socket with easy access.
The
b
symbol indicates the state of charge:
During charging the 4 charge indicators change; Each bar represents
around 25% of charge and it takes around 2.15 hours to fully recharge
your mobile phone.
6 Slide the battery pack into its slots,
connectors downwards, until it stops.
7 Put the back cover back on your phone:
hook the front housing onto the hinges on
the top of the phone (1), then press the
bottom down until the latches catch (2).
Fisio625_GB_4311 255 53832.book Page 12 Vendredi, 25. octobre 2002 6:10 18