Philips CD560 Cell Phone User Manual


 
34
Outgoing messages (OGM)
The outgoing message is the message your
caller hears when the answering machine picks
up the call. The answering machine has 2 pre-
recorded outgoing messages: the [ANSWER &
REC.] mode and [ANSWER ONLY] mode.
Record an outgoing message
The maximum length of the outgoing message
you can record is 3 minutes. The newly
recorded outgoing message automatically
replaces the old one.
1 Press menu.
2 Select [ANSWER MACHINE] >
[RECORD OGM], then press [SELECT]
to conrm.
3 Select [ANSWER & REC.] or [ANSWER
ONLY], then press [SELECT] to conrm.
4 Select [RECORD OGM], then press
[SELECT] to conrm.
5 Recording starts after the beep.
6 Press [OK] to stop recording or the
recording stops after 3 minutes.
The recorded outgoing message plays »
back automatically for your review.
Note
To restore the pre-recorded outgoing
message, delete your current outgoing
message.
Listen to the current outgoing
message
1 Press menu.
2 Select [ANSWER MACHINE] >
[RECORD OGM], then press [SELECT]
to conrm.
Set the answering machine
language
Note
This feature only applies to models with
multiple-language support.
The answering machine language is the language
for the outgoing messages.
1 Press menu.
2 Select [ANSWER MACHINE] >
[SETTINGS] > [VOICE LANGUAGE],
then press [SELECT] to conrm.
3 Select a language, then press [SELECT]
to conrm.
The setting is saved. »
Set the answer mode
You can set the answering machine and
select if the callers can leave messages. Select
[ANSWER & REC.] if you allow the callers to
leave messages. Select [ANSWER ONLY] if you
forbid the callers to leave messages.
1 Press menu.
2 Select [ANSWER MACHINE] >
[ANSWER MODE], then press
[SELECT] to conrm.
3 Select an answer mode, then press
[SELECT] to conrm.
The setting is saved. »
Note
If the memory is full, the answering machine
switches to [ANSWER ONLY] mode
automatically.
EN