Filter
Top Products
10
EN
Configure your ID9370
Language
Your ID9370 can support different display languages.
To change the language
1. Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to
Language and press
mSELECT.
2. Scroll
: to your desired language and press mSELECT to confirm.
A validation tone is emitted and the screen returns to previous menu.
Registration
The procedures described below are the procedures that you will find in your ID9370 handset.
The procedures may vary according to the handset you want to register. In this case, please
refer to the manufacturer of the additional handset.
Additional handsets must be registered to the base unit before you can use them. Up to 6
handsets can be registered to one base station.
Register your ID9370
After charging it for a few minutes, the word WELCOME appears on a blue screen. Next, the
idle screen appears. Follow these steps to register your handset:
1. In idle mode, the message “Press Base page key for 3 secs. Press and hold
m” will be
prompted on the screen. Follow the screen instructions to start registration.
2. Enter PIN will be displayed on your screen. Enter the default Master PIN number - 0000.
3. Press
mOK to confirm your registration.
The Master PIN is required before you can register or unregister handsets. The default
PIN is 0000.
All the handset keys (except the m key) are deactivated until the above registration
process is completed.
ID9370_extra_hs_IFU_EN_US.book Page 10 Tuesday, February 27, 2007 7:00 PM