Filter
Top Products
20
EN
Personal Settings
To rename the handset
1. Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Handset
Name and press
mSELECT.
2. Edit the handset name and press
mOK to confirm.
A validation tone is emitted and the screen returns to previous menu.
Language
See page 10.
Babysit mode
You must have at least 2 handsets registered to your base station to be able to use this feature
(see page 10 "Registration").
This feature allows you to monitor, e.g. the baby’s room. Place the handset in the room to be
monitored. If the sound level around the microphone of the handset exceeds a certain threshold,
the handset can automatically call another handset registered on the same base station.
To use the Babysit feature you need to activate it (e.g. on handset 1) and enter the number of
the handset to be called (e.g. handset 2) in the event that there are noises in the monitored
room. Place the handset which is in Babysit mode (e.g. handset 1) in the room to be monitored.
If this handset detects a sound level greater than a certain threshold, it will automatically initiate
an internal call to the selected handset (e.g. handset 2).
To activate Babysit mode
1. Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Babysit
mode and press
mSELECT.
2. Scroll through the list of handsets available and press
mSELECT to select the handset to
be called.
Maximum length of the handset name is 14 characters and the default handset name
is PHILIPS.
In Babysit mode, all keys are deactivated except for mMENU key. Babysit mode is
displayed on the screen when this function is activated and the handset cannot
perform any normal operation (making an outgoing call, receiving an incoming call,
intercom another handset, paging, etc.)
You can still perform all normal operations (making an outgoing call, receiving an
incoming call, intercom another handset, paging, etc.) on the selected handset.
ID9370_extra_hs_IFU_EN_US.book Page 20 Tuesday, February 27, 2007 7:00 PM