Filter
Top Products
23
EN
Call
Adjust loudspeaker volume
1. Press : key to select from Volume 1 to Volume 5.
Initiate a second call (subscription dependent)
1. Press >OPTION and select Init 2ND Call to put the current call on hold and initiate a second external
call.
Transfer call (subscription dependent)
1. Press >OPTION and select Call Transfer.
The screen shows R4.
2. Enter the phone number that you want to transfer your incoming calls to.
Consult phonebook
1. Press >OPTION and select Phonebook to access and review phonebook entries.
2. Press
r on the selected phonebook entry, the corresponding number will be dialled.
Intercom
This feature is only available when there are at least 2 registered handsets. It allows you to make free internal
calls, transfer external calls from one handset to another and use the conference option.
Intercom another handset
To be able to use intercommunication feature, you must have at least 2 handsets registered to your base
station (see page 52 "To register an additional handset").
1. Press
c key in stand-by mode.
2. Intercom is established immediately if there are only 2 registered handsets. If there are more than 2
registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to
All Handsets and press
mSELECT to call all the handsets or scroll to the specific handset you want to
call and press
mSELECT.
Transfer an external call to another handset
1. During the call, make a long press on ckey to put the external call on hold (the caller can no longer
hear you).
2. Intercom is established immediately if there are only 2 registered handsets. If there are more than 2
registered handsets, the handset numbers which are available for intercom will be displayed. Scroll
: to
All Handsets and press
mSELECT to call all the handsets or scroll to the specific handset you want to
call and press
mSELECT. The called handset rings.
3. Press
r key on the called handset to answer the internal call, where both internal callers can talk.
4. Press
e key on the first handset to transfer the external call to the called handset.
If the handset does not belong to SE730/735 range, this function may not be available.
If there is no answer from the called handset, press c key to resume the external call.