Filter
Top Products
5
Using AC Power
You can power the charger
using the supplied 9V,
210 mA AC adapter.
Caution: You must
use a Class 2 power
source that supplies
9V DC and delivers at
least 210 mA. Its center tip must be set to positive
and its plug must fi t the charger’s DC IN 9V jack. The
supplied adapter meets these specifi cations. Using an
adapter that does not meet these specifi cations could
damage the handset or the adapter.
Insert the supplied AC adapter’s barrel plug into the DC
IN 9V jack on the bottom of the charger. Route the cord
through the strain relief slot and plug the adapter into a
standard AC outlet.
Connecting/Charging the
Battery
The phone comes with a rechargeable nickel metal
hydride (Ni-MH) battery pack. Before using your phone,
you must install the battery pack,
and then charge it for about 15-20
hours.
Press down and slide the
battery compartment cover off.
1.
UU473BH_OM.indd 5UU473BH_OM.indd 5 2/15/2006 9:07:37 AM2/15/2006 9:07:37 AM