Filter
Top Products
6
Plug the battery pack’s connector into the socket in
the compartment (the connector fi ts only one way),
then place the battery pack in the compartment.
MODELS VARY! CHARGE HANDSET ON THE BASE
FOR REGISTRATION OR REFER TO OWNER’S
MANUAL appears.
Replace the cover.
To charge the battery pack, place the handset on the
charger. The CHARGE indicator on the charging cradle
lights. Proceed to “Registering the Handset” on Page 8.
Important: Be sure the battery pack is properly
connected before you try to charge it. The CHARGE
indicator lights when the handset is on the charger,
even if the battery pack is not connected.
Recharge the battery pack when LOW BATTERY appears.
Using a damp cloth, clean the charging contacts on
the handset about once a month.
If the battery pack becomes weak during a call, the
handset beeps and LOW BATTERY appears. When
this happens, you cannot make a call until you
recharge the battery pack.
If the display is blank and the phone does not work,
recharge the battery pack. (The battery power
might be too low to light the display.)
•
•
•
About once a month, fully discharge the battery by
keeping the handset off the base or charger until LOW
BATTERY stays lit. Otherwise, the battery pack loses its
ability to fully recharge.
2.
3.
UU473BH_OM.indb 6UU473BH_OM.indb 6 2/8/2006 2:48:08 PM2/8/2006 2:48:08 PM