Filter
Top Products
Phone Settings
132
When the phone asks for the password, enter the
password and press the
OK
soft key.
Note
: The password is preset to “00000000” at the
factory. To change this password, see
page 131.
FDN Mode
(Menu 6.6.7)
FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
Disable
: you can call any number.
Enable
: you can only call phone numbers stored in
Phone Book. You must enter your PIN2.
Note
: Not all SIM cards have a PIN2. If your SIM card
does not, this menu does not display.
Change PIN2
(Menu 6.6.8)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Note
: Not all SIM cards have a PIN2. If your SIM card
does not, this menu does not display.
remove a check
mark
Unmark
soft key.
lock the marked
items
OK
soft key.
To Press the