Filter
Top Products
85
SSeettttiinnggss
84
SSeettttiinnggss
Reset Settings
You can easily reset your phone to its default
configuration. Before proceeding, you must enter the
phone’s 4-digit password.
Note: The password is preset to 0000. To change this
password, refer to page 97.
Active Line
Some SIM cards may be used with two subscriber
numbers (network service). This function is only
available if your SIM card supports it.
This option allows you to select the line to be used
to make calls. However, calls can be answered on
both lines, regardless of the selected line. When you
select a line, the line number appears as an indicator
after the operator/service provider’s name.
When you select the Manual option, you can choose
a line whenever you use the call barring, call
diverting or call waiting functions; in this case, there
is no indicator to show which line is active.
Caller ID
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to
change this setting.
The following options are available.
Default: the default setting provided by the network
is used.
Hide Number: your number is not displayed on the
other person’s phone.
Send Number: your number is sent each time you
make a call.
Active Folder
The voice dial and voice command modes can be
activated automatically whenever the phone is
opened. The following options are available.
OFF: the voice dial and voice command modes must
be activated manually via the Voice Dial and Voice
Command menu options; for further information,
refer to pages 69 and 72 respectively.
Voice Dial: the voice dial mode is activated when
you open the phone.
Voice Command: the voice command mode is
activated when you open the phone.
Note: When you use the ear-microphone and the
Active Folder menu option is set to Voice Dial
or Voice Command, you can use the corres-
ponding function by pressing the button on the
ear-microphone.