Filter
Top Products
Section 2A: Your Sprint PCS Vision Phone - The Basics 20
Installing the Battery
To install the Li-Ion battery:
1. Insert the battery into the opening on the back of the phone at
an angle, making sure the plastic tab on the bottom of the
battery is inserted into the matching slot in the phone.
2. Press down until the battery snaps into place.
Removing the Battery
To remove your battery:
1. Make sure the power is off so that you don’t lose any stored
numbers or messages.
2. Push the battery release latch up completely.
3. Using the side tabs, pull the top of the battery away from the
phone and remove.