Filter
Top Products
Getting Started 7
Note:
You must fully charge the battery before using your phone for the first time. A discharged
battery recharges fully in approximately 4 hours.
1. With the battery installed, temporarily remove the plastic cover on the right
side of the phone and plug in the travel adapter’s connector into the jack.
Important!:
Verify that the handset battery is installed prior to connecting the travel adapter. If the
battery is not installed and the travel adapter is connected, the handset continuously
power cycles and prevents proper operation.
2. Plug the adapter’s power plug into a standard AC wall outlet.
Note:
The previous illustration displays the incorrect method for connecting the charger. If
attempted, damage to the accessory port occurs therefore voiding the phone’s warranty.
3. When charging is finished, unplug the adapter’s power plug from the AC wall
outlet and then disconnect the travel adapter’s connector from the phone.
4. Replace the plastic cover over the interface jack on the phone.
Warning!:
Failure to unplug the travel adapter before you remove the battery, can cause damage to
the phone.
Correct
Incorrect
t401G.book Page 7 Monday, August 10, 2009 2:35 PM