Sony 1266-1565 Cell Phone User Manual


 
To take a self-portrait using the front camera
1
Activate the camera.
2
Tap the icon on the top left of the screen, then find and select Front camera.
3
To take the photo, press the camera key. The photo is taken as soon as you
release your finger.
To use the zoom function
When the camera is open, press the volume key up or down to zoom in or out.
To use the still camera flash
1
When the camera is open, press .
2
Tap Flash, and select your desired flash setting.
3
Take the photo.
To view your photos and videos
1
Open the camera, then tap a thumbnail at the top right of the screen to open a
photo or video.
2
Flick left or right to view your photos and videos. Videos are identified by .
To delete a photo
1
Open the photo that you want to delete.
2
Tap an empty area of the screen to make
appear.
3
Tap .
4
Tap OK to confirm.
Adding the geographical position to your photos
Turn on geotagging to add the approximate geographical location (a geotag) to
photos when you take them. The geographical location is determined either by
wireless networks (mobile or Wi-Fi® networks) or GPS technology.
When appears on the camera screen, geotagging is turned on but the
geographical position has not been found. When appears, geotagging is turned on
and the geographical location is available, so your photo can get geotagged. When
neither of these two symbols appears, geotagging is turned off.
To turn on geotagging
1
Activate the camera.
2
Tap , then tap Geotagging > On.
3
Tap OK to agree to enable GPS and/or wireless networks.
4
Check the options that you want to select under Location services.
5
After you confirm your settings, press
to return to the camera screen.
6
If appears on the camera screen, your location is available and your photo
can get geotagged. If not, check your GPS and/or wireless network
connection.
Using still camera settings
To select still camera settings
1
From your Home screen, tap , then find and tap .
2
To display all settings, press .
3
Tap the setting you want to select.
To customise the still camera settings panel
1
When the camera is open, tap to display all settings.
2
Touch and hold the setting you want to move and drag it to the desired
position.
If you drag the setting outside of the settings panel, the change is cancelled.
68
This is an Internet version of this publication. © Print only for private use.