Filter
Top Products
100
Sets the ISO sensitivity to 100.
200
Sets the ISO sensitivity to 200.
400
Sets the ISO sensitivity to 400.
800
Sets the ISO sensitivity to 800.
This setting is only available in Normal capturing mode.
Metering
This function automatically determines a well-balanced exposure by measuring the
amount of light striking the image you want to capture.
Center
Adjusts the exposure to the centre of the image.
Average
Calculates the exposure based on the amount of light striking the whole image.
Spot
Adjusts the exposure in a very small part of the image that you want to capture.
This setting is only available in Normal capturing mode.
Image stabiliser
When taking a photo, it can be difficult to hold the device steady. The stabiliser helps
you by compensating for small movements of the hand.
Geotagging
Tag photos with details of where you took them.
On
When geotagging is turned on, the approximate geographical location is added to photos when you
take them. To use geotagging, you must enable location features from the Settings menu. For
geotags to be added to a photo, the location must be determined before you take the photo. Your
location is determined when appears on the camera screen. When your device is searching for
your position, appears.
Off
When geotagging is turned off, you cannot view the location where you took a photo.
Preview
You can choose to preview the photo just after you have taken or the video you have
recorded.
Unlimited
The preview of the photo or video appears after you have taken.
5 seconds
The preview of the photo or video apears for 5 seconds after you have taken.
3 seconds
The preview of the photo or video appears for 3 seconds after you have taken.
Off
The photo or video has been saved after you have taken, no preview appears.
This setting is only available in Normal capturing mode.
74
This is an Internet version of this publication. © Print only for private use.