Filter
Top Products
96
Protective cover
You can remove the protective cover as follows.
Removing the protective cover
Attaching the protective cover
1
Push 1 with your left hand.
2
Remove the cover in the direction 2 pulling the other side
of 1.
1
Fit the projection on the left of the cover to the hole in
your CLIÉ handheld.
2
Attach the cover in the direction 2 pushing the projection
on the right of the cover into the hole of your CLIÉ
handheld.
Note
Make sure you push the projection when attaching the cover, otherwise the projection
may break.