Filter
Top Products
N
o
t
f
o
r
c
o
m
me
r
c
i
a
l
u
s
e
–
E
r
i
c
s
s
o
n
I
n
c
.
Using Voice Commands
52
Recording a Contact Name
1 Scroll to Settings, Select, Voice Control, Select,
VoiceCommands, Select, Contacts, Select, Add
Voice Label
, OK.
2 Select a contact and press
OK.
3 Follow the instructions in the display.
Note! An icon ( ) appears next to the contact names
which have a voice command.
Caller Name
You can choose whether you want to hear the recorded
voice command for a name when you receive an
incoming call.
1 Scroll to
Settings, Select, Voice Control, Select,
VoiceSettings, Select, Caller Name, Select.
2 Select
On or Off.
Voice Dialing
Voice Activated Dialing
1 From standby, press and hold either the upper or
lower side volume key until you hear a tone.
2 Release the upper or lower side volume key, lift the
phone to your ear and say a name, for example
“John” after the tone. The name is played back to
you.
3 If you have saved several numbers for that contact:
After a second tone, say a number type that you
have recorded earlier, for example “home”. The
number type is played back to you, and the call is
connected.
Note! Only the number types available for that contact
are played to you.
Other and Fax number types
are not available for voice dialing.
From standby, you can also initiate voice dialing and
voice control of voice memos by:
• pressing either the upper or lower side volume key.
Ditto Nicole_NoBr.book Page 52 Tuesday, August 28, 2001 11:39 AM