Filter
Top Products
For Internal Use Only
P800 Smartphone
White Paper, May 2002
49
Customisation
The P800 may be customised in a number of ways:
• In the factory or at a Sony Ericsson Service Point, on behalf of a mobile operator.
•
Via Over The Air (OTA) configuration , initiated by operator, user or IT helpdesk.
• By the User (via the MMI, including interactive M-Services)
A system reset will remove all user customisation and set the P800 back to the factory-
customisation state of the device.
User Customisation
Wallpaper and Application Shortcuts
The user may set a static image to be the background
‘wallpaper’ for the FC standby screen. Image size is 208 x
320 pixels and formats JPEG, GIF, BMP, WBMP, MBM and
PNG are supported. The upper part, 208 x 144 pixels,
carries the image seen in FC; the lower part may be set to
a colour or design to influence the light which shines
through the keys.
Background images may be downloaded via M-Services.
Suitable images may also be beamed in to the P800 using
Bluetooth or Infrared, or transferred in over the PC link.
The application shortcut buttons may be customised by the
user.
Screen Saver
A ‘screen saver’ image is displayed after a period of
inactivity. The user can switch this facility on and off and
select the delay period before the screen saver is
displayed. Image format is the same as the Wallpaper
image above. The top part of the image is displayed in FC
mode and the entire image is displayed in FO mode.
Key lock and device lock may be used in combination with
the screen saver. Upon pressing a button or touching the
screen, the user will be prompted to activate keys and/or
enter the device lock code.
When the screen saver or screen blanker is deactivated,
the P800 will revert to the state it was in before the screen
saver was activated.